97 lines
3.5 KiB
Markdown
97 lines
3.5 KiB
Markdown
up:: [[HouseBuilding]]
|
|
tags::
|
|
|
|
# Foundation Building
|
|
|
|
These are the details of how to ... or how i will ... design and build the foundation of the house.
|
|
|
|
So far I've found two styles that I like:
|
|
1) [# Build A 12'x20' Modern Shed and Deck by Yourself: With Material List](https://youtu.be/J7ljCMW8Bec)
|
|
2) [Building a Remote Off Grid Cabin in the woods...Deep Dive commentary - YouTube](https://youtu.be/rmNoDi7mZyM)
|
|
|
|
## Building connection to ground
|
|
Its important that the building is anchored to the ground to some capacity.
|
|
### Option 1
|
|
with this option, we can build some small concrete pillers.. The upside to this is, I only need to dig about 3-4 inches into the ground.. The downside is, I need to mix the concrete, and ensure it cures properly with the proper hardware embedded in it
|
|
### Option 2
|
|
with this option, we can use treated ground contact 6x6 posts.. The upside is, no mixing, no waiting, and no hardware stuff.. The downside, I have to dig about a 3 foot hole 4 times
|
|
|
|
## Building the frame
|
|
### Material List
|
|
| amount | length | dimensions | name|
|
|
|---------|-------|-------------|-----|
|
|
| 2 | 20' | 4"x10" | board |
|
|
| 16 | 16' | 2"x10"| board |
|
|
| 1 | 6mil | 20'x15' | plastic sheet |
|
|
| 8 | 3/4" | 4'x8' | plywood |
|
|
|
|
### Option 1
|
|
placing the 4x10 boards in the hardware attached to the pillars, and the 2x10s perpidicular attached to those.
|
|
Before installing floor joists.. Attached joist hangers - using a dummy piece to messure distance from top of beam at 16" on center - using deck screws.. about 28 hangers
|
|
> [!NOTE]
|
|
> Its best to predrill holes, makes for easier insertion
|
|
|
|
After adding the floor joists, add a 6mil sheet of plastic for the vapor barrier *Would probably be easier to add before floor joists*
|
|
Use 3/4" pressure treated plywood for floor - staggered ofcourse
|
|
I actually want to insulate the floor as well so we need to drill in some 2x2 boards along the inside of the joists to lay some insulation **Stolen from option 2**
|
|
|
|
### Option 2
|
|
tbd
|
|
|
|
## Building back wall
|
|
### Material list
|
|
| amount | length | dimensions | name|
|
|
|---------|-------|-------------|-----|
|
|
| 3 | 20' | 2"x4" | board |
|
|
| 18 | 8' | 2"x4"| board |
|
|
|
|
### Option 1
|
|
build with 16" on center for vertical 2x4 boards. Adding a second top plate but leave a 3-1/2" gap on each side for the side walls to attach to.
|
|
|
|
## Building side wall
|
|
### Material list
|
|
| amount | length | dimensions | name|
|
|
|---------|-------|-------------|-----|
|
|
| 3 | 16' | 2"x4" | board |
|
|
| 10 | 8' | 2"x4"| board |
|
|
|
|
### Option 1
|
|
build with 16" on center for vertical 2x4 boards. Adding a second top plate but leave a 3-1/2" gap on the side that will connect to the back wall for interlocking
|
|
|
|
## Building front wall
|
|
### Material list
|
|
| amount | length | dimensions | name|
|
|
|---------|-------|-------------|-----|
|
|
| 2 | 20' | 2"x4" | board |
|
|
| 4 | 10' | 2"x4"| board |
|
|
| 18 | 8' | 2"x4" | board |
|
|
| 2 | 20' | 2"x6" | board |
|
|
| 1 | 8' | 2"x6" | board
|
|
|
|
### Option 1
|
|
TBD
|
|
|
|
## Building last wall
|
|
### Material list
|
|
| amount | length | dimensions | name|
|
|
|---------|-------|-------------|-----|
|
|
| 2 | 12' | 2"x4" | board |
|
|
| 12 | 8' | 2"x4" | board |
|
|
| 1 | 8' | 2"x6" | board
|
|
|
|
### Option 1
|
|
TBD
|
|
|
|
|
|
## Building the roof
|
|
### Material List
|
|
28 rafter ties
|
|
18 2"x8" 16' rafters
|
|
2 2"x8" 16' rafter nubbins
|
|
12 1/2" 4'x8' plywood
|
|
|
|
### Option 1
|
|
ties placed 16" on center
|
|
Using a 5/8" piece of board of something, put rafter up on location and cut the bird box out of the board, using this one as a template for the rest
|
|
use the cut out piece to get the angle of the end cut angle... easy
|